The Standard Plus floor is a genuine expert – and has a great value for money.
In residential areas, it can withstand almost any degree of wear and is still suitable for commercial areas with moderate or occasional use.
| Test | Characteristics | Test method |
|---|---|---|
| Formaldehyde emission | < 0.05 ppm | EN 717-1 |
| Surface stain resistance | Grade 5, no visible changes to surface | EN 438-2, 15 |
| Lightfastness | ≥ Level 6 Blue Wool Scale
≥ Level 4 Grey Scale |
EN ISO 105-B02
EN 20 105-A02 |
| Resistance to cigarette embers | Grade 4, no visible changes to surface | EN 438-2, 18 |
| Fire resistance | Ignites with difficulty, at least Cfl-s1 | EN 13501-1 |
| Height difference between connected elements | Average: ≤ 0.10 mm
max: ≤ 0.15 mm |
EN 13329 |
| Edge straightness (bend) | ≤ 0.3 mm/m | EN 13329 |
| Openings between connected elements | Average: ≤ 0.15 mm
max: ≤ 0.20 mm |
EN 13329 |
| Static indentation | < 0.01 mm – no visible changes, Impression in test with straight steel cylinder of 11,3 mm diameter | EN 433 |
| Strength | Thermal conductivity (W / (m × K) | Overall heat transfer coefficient Thermal resistance (m² × K) / W) |
|---|---|---|
| 7 | 0.13 | 0.056 |
VIDEO Installation instructions
Installation instructions Express Clic System“
Preparation for installation
Prior to laying, please store Kronotex flooring horizontally in its unopened packaging at room temperature for a minimum of 48 hours so that the planks have enough time to reach room temperature.
The following ambient conditions should prevail previous to, during, and three days following installation:
- Floor surface: min. 15°C
- Air temperature: min. 18°C
- Humidity: 50 – 75%
