THE WORKAHOLIC: FOR PERMANENT STRESS
If load-bearing capacity is a priority when choosing the floor, it is clear what you should choose: namely – nomen est omen – ROBUSTO.
With a high-density, 12-millimetre-thick carrier plate and the Clic system, which was developed for peak loads, ROBUSTO stands for maximum resistance. Not to mention its surface, which can withstand a lot.
A floor on which you can make a lot of demands without any problems and which retains its original beauty for many years even when used commercially.
See our products in your environment.
Use our Flooring Visualizer to plan your floors virtually. With the tool you are able to view all decors of our Flooring products in either the provided roomshots or even in your own room.
Test | Characteristics |
Test method |
---|---|---|
Formaldehyde emission | < 0.05 ppm | EN 717-1 |
Surface stain resistance | Grade 5, no visible changes to surface | EN 438-2, 15 |
Lightfastness |
≥ Level 6 Blue Wool Scale ≥ Level 4 Grey Scale |
EN ISO 105-B02 EN 20 105-A02 |
Resistance to cigarette embers | Grade 4, no visible changes to surface | EN 438-2, 18 |
Fire resistance | Ignites with difficulty, at least Cfl-s1 | EN 13501-1 |
Height difference between connected elements |
Average: ≤ 0,10 mm max: ≤ 0,15 mm |
EN 13329 |
Edge straightness (bend) | ≤ 0.3 mm/m | EN 13329 |
Openings between connected elements |
Average: ≤ 0,15 mm max: ≤ 0,20 mm |
EN 13329 |
Static indentation | < 0.01 mm – no visible changes, Impression in test with straight steel cylinder of 11,3 mm diameter | EN 433 |
Strength | Thermal conductivity (W / (m × K) |
Overall heat transfer coefficient Thermal resistance (m² × K) / W) |
---|---|---|
12 | 0.14 | 0.09 |
Product Range
Strength | Lenght | Width | Panels per box | m² / box | Boxes per pallet | m² / pallet |
---|---|---|---|---|---|---|
12 | 1375 | 188 | 5 | 1,293 | 56 | 72,380 |
Decor
Edges
Skirting board
VIDEO INSTALLATION GUIDE
INSTALLATION INSTRUCTIONS „CLIC SYSTEM“
PREPARATION FOR INSTALLATION
Prior to laying, please store Kronotex flooring horizontally in its unopened packaging at room temperature for a minimum of 48 hours so that the planks have enough time to reach room temperature.
The following ambient conditions should prevail previous to, during, and three days following installation:
• Floor surface: min. 15°C
• Air temperature: min. 18°C
• Humidity: 50 – 75%