There are situations in life where one needs a thick skin. Where one has to be very resilient and tough. Which is why Evolution is also the perfect floor for extreme levels of use. With its high-density, 12-mm thick fibreboard and an especially wear-resistant surface, it can cope with pretty much anything to which it is exposed. Even if used for commercial purposes. Its CLIC tongue-and-groove connection system will never disappoint in any situation as it was specially developed to hold up under the highest pressure.

• DECORS

• INFORMATION

• SPECIFICATIONS

• PRODUCT RANGE

• INSTALLATION

• CODES

D 3128

CODE: D 3128 / V4

D 3530

CODE: D 3530 / V4

D 3900

CODE: D 3900 / V4

D 3901

CODE: D 3901 / V4

D 3902

CODE: D 3902 / V4

Test	Characteristics	Test method
Formaldehyde emission	<0,05 ppm	EN 717-1
Surface stain resistance	Grade 5, no visible changes to surface	EN 438-2, 15
Lightfastness	≥ Level 6 Blue Wool Scale ≥ Level 4 Grey Scale	EN ISO 105-B02EN 20 105-A02
Resistance to cigarette embers	Grade 4, no visible changes to surface	EN 438-2, 18
Fire resistance	Ignites with difficulty, at least Cfl-s1	EN 13501-1
Height difference between connected elements	Average: ≤ 0,10 mm,max: ≤ 0,15 mm	EN 13329
Edge straightness (bend)	≤ 0,3 mm / m
Openings between connected elements	Average: ≤ 0,15 mmmax: ≤ 0,20 mm	EN 13329
Static indentation	< 0.01 mm – no visible changes, Impression in test with straight steel cylinder of 11,3 mm diameter	EN 433

 

Strength	Thermal conductivity (W / (m × K)	Overall heat transfer coefficient Thermal resistance (m² × K) / W)
12	0,14	0,09

Strength	Lenght	Width	Panels per box	m² / box	Boxes per pallet	m² / pallet
12	1375	188	5	1,293	56	72,380

Decor
1-strip	D3128  / D3530 / D3900 / D3901 / D3902

 

Edges
	D3128  / D3530 / D3900 / D3901 / D3902

Installation instructions „Clic System“ CLIC2″

Preparation for installation

 

Prior to laying, please store Kronotex flooring horizontally in its unopened packaging at room temperature for a minimum of 48 hours so that the planks have enough time to reach room temperature.

The following ambient conditions should prevail previous to, during, and three days following installation:

• Floor surface: min. 15°C
• Air temperature: min. 18°C
• Humidity: 50 – 75%

 

INSTALATION

• D 3128 (D3128)
• D 3530 (D3530)
• D 3900 (D3900)
• D 3901 (D3901)
• D 3902 (D3902)