KRONOTEX FLOORING: STANDARD

Standard 7 mm

The floor of STANDARD series is a true expert – and has an excellent price / performance ratio. In living areas, it can withstand almost any degree of wear and it is even suitable for commercial areas with moderate or occasional use.

DECORS
INFORMATION
SPECIFICATIONS
PRODUCT RANGE
INSTALLATION
CODES

White Oak

CODE: D 2951

Millennium Oak

CODE: D3530 / V4

test	Characteristics	Test method
Formaldehyde emission	<0,05 ppm	EN 717-1
Surface stain resistance	Grade 5, no visible changes to surface	EN 438-2, 15
Lightfastness	≥ Level 6 Blue Wool Scale ≥ Level 4 Grey Scale	EN ISO 105-B02 EN 20 105-A02
Resistance to cigarette embers	Grade 4, no visible changes to surface	EN 438-2, 18
Fire resistance	Ignites with difficulty, at least Cfl-s1	EN 13501-1
Height difference between connected elements	Average: ≤ 0,10 mm, max: ≤ 0,15 mm	EN 13329
Edge straightness (bend)	≤ 0,3 mm / m	EN 13329
Openings between connected elements	Average: ≤ 0,15 mm max: ≤ 0,20 mm	EN 13329
Static indentation	< 0.01 mm – no visible changes, Impression in test with straight steel cylinder of 11,3 mm diameter	EN 433

Strength	Thermal conductivity (W / (m × K)	Overall heat transfer coefficient Thermal resistance (m² × K) / W)
7	0,13	0,055

Strength	Lenght	Width	Panels per box	m² / box	Boxes per pallet	m² / pallet
7	1376	193	9	2,390	56	133,84

Decor
1-strip	D 705 / D 742 / D 3126 / D 3127 / D 3128
2-strip	D 1210
3-strip	D 1329 / D 1359 / D 1371 / D 1411 / D 1424 / D2951

Installation instructions „Clic System“ CLIC2CLIC”
Preparation for installation

Prior to laying, please store Kronotex flooring horizontally in its unopened packaging at room temperature for a minimum of 48 hours so that the planks have enough time to reach room temperature.

The following ambient conditions should prevail previous to, during, and three days following installation:

Floor surface: min. 15°C
Air temperature: min. 18°C
Humidity: 50 – 75%